Blower 2kw with LCD screen, 4 nozzles Tough Master TM-HG612

TOUGH MASTER Blower 2 kW 12 Temperature Settings LCD Screen 4 Directional Nozzles

Advantages

POWERFUL MOTOR : The 2000W motor generates enough heat and airflow for almost any everyday project. Its high efficiency ceramic heating element heats up in seconds. This electric hot air blower has two power modes: I (max): 350℃, 250 l/min; II (max.): 600 ℃, 550 l/min. The cooling mode for this electric hot air drill is 50℃, 550 l/min. The TOUGH MASTER® TM-HG612 hot air drill can operate for a full 500 hours.

12 TEMPERATURE SETTINGS : With this hot air blower, you can switch the temperature between a low temperature setting of 50°C to a maximum of 600°C at the touch of a button. Adjustable temperature settings allow you to perform all tasks, whether you are a plumber, carpenter or construction specialist; this makes this electric hot air blower an excellent paint remover and the best blower for PVC piping.

LCD DISPLAY AND MEMORY FUNCTION : Thanks to the digital display, this electric hot air blower clearly shows the temperature and airflow settings, so you can be sure you are using the correct level of heat and airflow for your task. The corded hot air blower also has a built-in memory function and will continue to operate at the last set temperatures and speeds.

ERGONOMIC DESIGN : This electric hot air blower has a rubberized handle that provides an ergonomic grip for comfortable use, even for long periods of time. The blower can be stored on the built-in parking position, so you can freely hold the workpiece with both hands during close work.

OVERHEATING PROTECTION AND 3 SECONDS SHUTOFF ; When the temperature exceeds the set temperature, it will automatically shut down, which means this blower is safe to use. It has 2 shutdown methods: Press the shutdown button and wait for the blue indicator to turn on, and the unit will shut down after 30 seconds of cooling. Hold the button for 3 seconds and the device will turn off immediately.

Product Specifications

Nominal power: 2000W
Voltage: 220-240V
Frequency: 50Hz
Heating element: Ceramic
Temperature setting type: FIKEURO/EURO
Cable length: 1.8 m
Memory function
LCD display for temperature and airflow
12 temperature settings (°C)
Cooling: 50°C
Setting 1: 50°C, 100°C, 150°C, 200°C, 250°C, 350°C
Setting 2: 100°C, 200°C, 300°C, 400°C, 500°C, 600°C
2 air flow settings (l/min):
Speed ​​1 - 250 l/min
Speed ​​2 – 550 l/min
Cooling: 550 l/min
Certificates: CE, UKCA, GS, TUV, Intertek, ROHS
Weight: 750 grams
Dimensions: 25.5 x 10 x 24cm

Contents of this product

1 x 2000W hot air drill
1 x Reflector box
1 x surface box
1 x reduction box
1 x Glass Protection Box